Examples

Here at Techcon, we know that there are many different applications for fluid dispensing. We offer a large selection of systems that range from manual to high-speed automated solutions.
Adhesive dispensers have three dispensing methods: manual handheld, semi-automatic and automatic. Each is used in several different industries, including aerospace, manufacturing of medical devices and assembly of electronics. Our full adhesive dispensing system line addresses the needs of most dispensing applications, such as:

TECHCON TS9800點膠閥產品介紹
TS9800+TS980產品視頻

Bonding With Cyanoacrylate Application
CA is a very frequently used adhesive in the generic bonding application and it is required in a moisture resistant dispensing system. TheTS5622VU Diaphragm valvealong with theTS500R - Multi-Purpose Dispensing Valve ControllerandTS1258 - Pressure Tank (Po

Domed Logo Badges Application (Doming)
Consumer & business products often display the manufacturer's name on a sticker that is encapsulated underneath a dome of fluid. This is called "Doming" and is commonly used as this adds a better "look and feel" to the product.

Microdot Adhesive Application
Most medical device manufacturing applications require a dispensing system that can provide a highly repeatable dispensing of UV adhesives. With the unique needle shut off design inside the dispensing tip, theTS5440 - Microshot Needle Valveis a perfect ch

Spray Conformal Coating Application
TheTS5540 Series - Spray Valvesalong with theTS500R - Multi-Purpose Dispensing Valve Controllerand theTS1258 - Pressure Tank (Pot)is an ideal system to spray conformal coating material on the surface of an assembled printed circuit board to provide protec

Gasketing Application
When a high throughput or large shot size is required for gasketing or similar “Form-in-place-gasket” applications, theTS941 Series - High Pressure Spool Valvealong withTS350 - Digital Fluid Dispenseris the recommended system choice. Whether the fluid is

Dam Writing Application
The TS7000 Series - Interchangeable Material Path (IMP) Rotary Valve along with the TS500R - Multi-Purpose Dispensing Valve Controller is an ideal dispensing system to dispense the “Dam” around the die of an integrated circuit (i.c.) as an alternative met

Plural Component Material Dispensing
Plural component material dispensing is no longer a problem when using a Disposable Material Path valve. When the 2-component material starts to cure, just throw away the valve wetted parts. It takes less than 1 minute to replace new parts.

Solder Paste Dispensing
Solder paste is the most difficult material to dispense. The TS7000 Series - Interchangeable Material Path (IMP) Rotary Valve is designed specifically to dispense solder paste without clogging and separation. Dot size as small as 0.010” (0.254mm) can be d

APPLICATIONS

0755-29955243

Examples